Home » Products » CimCool » CimCool Rust Preventive

CimCool Rust Preventive

<< Previous   CimCool Rust Preventive   Next >>
Product Specification
Cutting and Grinding Fluid for Medium Duty Applications
CUMISTAR 306 is dark brown, water miscible, non-nitrite, preformed macro emulsion type cutting fluid concentrate.
CUMISTAR 306 is a general cutting fluid recommended for medium duty grinding and machining of all ferrous and most ferrous metals.It is especially suitable for aluminum alloys.CUMISTAR 306 product designed for use in individual machines.
Features and benefits
Good rancidity control
Suitable for wide range of material and operations
Does not stain aluminum and aluminum alloys.
Excellent emulsion stability.
Clean and mild product.
Will not smoke or burn.
Method of Application
CUMISTAR 306 is easy to mix , normal stirring only. Typical starting water temeprature condition should be 5 - 25C
Recommended starting concentration
  Aluminium And copper Alloys Steel alloys and Stainless Steel
Grinding 4% 5%
Standard Machining 6% 6%
Concentration Analysis
For concentration analysis, use the Refractoro Meter. The resultant reading multiplied by a factor of 1.5 will only be relevant when applied to a fresh mix.
Handling and Storage
Protect from freezing, direct sun and store between 5 - 30 C.
Packaging type
20,35 and 200liters.
Cimguard 20
Cimguard 20 is an oil/solvent based water-displacing corrosion preventive for protection of all ferrous and non-ferrous metals during indoor storage and wrapped shipment.
Cimguard 20 forms a protective coating which is thin and slightly oily, non-staining to copper, copper alloys and aluminium. Specifically designed for dip tanks and production line spray application to parts wet with water-based cutting or grinding fluids where fluid run-off is collected for re-use. In the sump, water quickly settles to the bottom and can be drained off. For optimal performance, it is recommended to use a specially designed tank, which permits the easy removal of displaced water. Provision should be made for the surplus fluid to drain from the components when subsequent evaporation that will leave the protective film.
Features and benefits
Rapidly displaces water and deposits a polar corrosion preventive film on the metal.
Non-emulsifying - water separates rapidly from the metal and settles to the bottom of the tank, leaving Cimguard 20 ready for re-use.
Free from heavy metals such as Barium
Quick curing - leaving a thin protective film after evaporation.
Long lasting protection in process for wet or dry metal parts during indoor storage, or in wrapped shipment.
Protective coating does not prevent accurate gauging of finished components
Safe based on low aromatic high flashpoint solvent.
Features and benefits
  Test Methods Typical Characteristics
Base   Oil/solvent
Colour Visual / ASTM D 1500 Clear golden brown / 3-4
Flashpoint ASTM D93 72º C
Barium content   Free
Film thickness (approx.) Micron 3
Film characteristics – residue type   Oily, transparent
% Non volatile ASTM D2369 (modified) 14
Water displacing   Yes
Fingerprint neutralization   Yes
Coverage (approx.) g/m2 3
Approx. Drying time @ 25C   2 hours
Type of protection   Indoor storage & Wrapped shipment
Ind. protection time   12 - 18 months
Corrosion testing data    
Humidity cabinet (hours) ASTM D1748 >1000
Salt spray testing (hours) ASTM B117 1
Removal methods   Solvent, Alkaline cleaner
Typical concentration   Neat

Product Code : 023      Brand Name :CimCool

Other Products in 'CimCool' category
Industrial CimCool
Industrial CimCool
Cimcool Neat Oil
Cimcool Neat Oil
<< Back

Plot No. 92, GIDC Estate, Phase-I, Narmadanagar, Bharuch - 392015, Gujarat, India
Send Inquiry   border="0">
Key Personnel
Ms. Priyavadan Shah (Proprietor)
Mr. Jigarbhai (Manager)

Copyright © 2012-17 by J. PRIYAVADAN & CO. All Rights Reserved.